SP Primer - Undercoat is based on a pure acrylic water-borne polymer recommended tinted primer for both prepared and primed interior and exterior surfaces where a high-quality emulsion or solvent-based paint is applied.
Applicable to: new and previously leveled interior and exterior surfaces such as plaster, concrete, masonry, wood, brick, and steel.
Surface must be clean, dry and free from all defective and poorly adhering material, dirt, grease and salts.
Wipe the surface clean.
Sand the surface with coarse sand/water paper according to the surface type to remove unwanted layers.
Full render - 2 to 6 hours.
Recoat Dry Time - 4 hours.
Drying times refer to normal conditions:
25 C - 50% Humidity.
Under cooler, humid or still conditions, longer drying times may be necessary.
Brush, roller or airless spray.
1 Liter - 10 SQM per coat.
Concrete, wood, stone and steel.
Clear and white.
Interior or Exterior
Interior and exterior.
The product must be stored and disposed-of in accordance with national regulations.
Productshould be kept in cool dry place.
Protect from frost.
Containers should be kept in original seal for storage.
Handle with care.
Stir well before use.
Supra Paints Undercoat Water Based